This page contains 3 articles on PSI Balls. Click the link below to read the article of your choice.
PSI is a form of energy and making PSI balls is nothing more than making a ball of energy. You are in reality molding psi energy with your mind and hands to form the psi balls into a round shape. The vast majority of the time people call them psi balls, however, you can construct them into the shape of a psi square or a psi brick or any other shape you may choose.
To start to make a PSI ball, first get your hands attuned to feeling energy. This is easily accomplished by holding your hands in front of you, almost like you are praying. Then lightly rub your palms together to create a small amount of heat.
Feel the sensation of that heat in your palms. Now move your hands apart slightly. Just a half inch or so will do. You will notice there is a slight difference in the feeling of the heat in your palms. If it so happens that you have lost the feeling of the heat completely, just take a moment to rub your palms together again.
Once you know what that heat energy feels like with your hands a half inch apart, move your hands about 2 inches apart. The feel of the energy should change but you should still be able to feel it.
Now slowly move your hands closer together and feel how the energy changes. It may take a few tries of moving your hands closer and further apart in a sort of bouncing motion. Moving them just an inch or two at a time but not to the point of actually touching. Eventually, you will realize that the energy between your hands is starting to compress.
Continue to bounce your hands as written above. After a while, the energy will begin to feel like a ball between your hands and you may have to pull them a little further apart to allow the energy to build. Basically what you are doing is as you are pulling your hand apart, energy flows between your hands. As you push your hands together, you are compressing the energy. All the while you are compressing the energy between your hands, keep your concentration on your hands and the energy between them.
The real energy jolt behind all of this, comes from when you use your mind to pull energy from the universe and compress it into your psi ball. It is important to not use your own personal energy to build your psi balls with. It will leave you drained and has been known to make people cranky and hard to get along with. The universe has a never ending supply of energy so why take your own?
Visualization is the key here. Visualize a stream of pure white light coming from the center of the universe and streaming down into the top of your head. You can allow this white light to fill you entire body, energizing you first. When your body is full, then see the energy flowing down you arms, through your hands and into your psi ball.
Continue to compress the psi balls as more and more energy flows down your arms. As the psi ball gets bigger, just move your hands slightly further apart until you make it as large as you want it to be.
How big to make it? That is up to you. You can make it larger by slowly moving your hands further and further apart as you compress the energy. You can keep it smaller by limiting how far apart you move your hands.
What should you do with it after you make it? Again that is up to you, but it is best to do something with it. Too many stray psi balls of energy laying around can cause a build up of energy within your environment and cause undue stress on emotions.
Some of the possibilities are: 1) program the energy to do a specific function for you. 2) pick a designated place to put it so you can come back to it later to make it bigger, stronger or program it. 3) return the energy to the earth to be reprocessed.
When you program the energy of psi balls to do a specific function for you, it can also be called a "thought form". I've heard it called many other names with one of the most memorable being a "golem".
To program a psi ball, involves giving it a specific instruction. It is best to keep the instruction as short as possible and you will get better results giving it only one instruction rather than a set of instructions. How you give it the instruction varies with your personal taste. I've known people that spend hours concentrating on the instruction they are giving their psi ball. Others talk to the psi balls almost as if it is a pet or a friend. Still others will send the thought down their arms and into the psi energy ball. You must decide what works for you personally.
Where should you put your psi ball to store it? I suggest in a drawer or closet but any place where it is not apt to be walked on or through should be just fine.
How do you return the psi ball energy to the earth? The easiest way for me is to place the energy ball on the ground (or floor if you are inside) and allow the energy to basically melt or dissolve into the earth. See this happen in your minds eye (visualize). Where your thoughts go, energy flows.
>How do you know for sure you made a PSI ball? Most people can not see PSI but they can feel it. When you were making your PSI Ball, did you feel the energy building up between your hands? When you compressed the energy between your hands, did you feel the energy pushing back on your palms? Some people, (not everyone) will feel the PSI as a tingling sensation between their palms. For others it is simply the feeling of something compressing between their hands, almost like you have a nerf ball between your hands. It is heavy enough to put a little pressure on your hands, but not heavy enough to feel solid. If you experienced any of these feeling, you made a PSI ball.
Another test you can try is to see if someone else can feel the energy. If you have a friend over, slowly bring the PSI ball toward them and see if they feel the energy. If you have someone that is learning along with you, hand the psi balls to them and see if they feel the energy. With a little thinking, you can come up with a whole list of experiments you can try with a friend to see what your PSI balls are like.
When you have a few friends over, try handing them a PSI ball. If they have never worked with PSI balls before, explain to them what to expect, anything from a slight tingling in the hands to a warm sensation and tell them to pay attention to how their hands feel, then hand them the PSI ball and see what they feel.
After they get a little experience under their belt, you can make your PSI balls into different shapes or colors, hand it to your friend and see if you friend can pick up on the shape or color you made your PSI ball.
I hope this short tutorial has helped you. This lesson may be reprinted without notice at any time as long as this writers resource box and links is kept intact.
Pamela Freeman, AKA Fern Owl is the owner of http://learn-telekinesis-training.com.Return to Top
A psi ball also known as an energy ball, can be built to accomplish multiple goals. In this article we will cover how to make a psi ball to be used as an energy shield.
In your day to day life, you are constantly being bombarded with energies of various types. As you know, everything in the universe is composed of energy and energy never dies, it only transmutes (transforms) from one form to another.
When we talk about any form of kinesis, we are talking about manipulating energies to accomplish a specific goal. Telekinesis is manipulating energies to move an object without physically touching it. Electrokinesis is manipulating energy to control electricity which is yet another form of energy.
Of course all of this is happening on a structure level versus the level we experience in our waking every day world. But it is important to understand how everything works beneath what we see as our waking world around us.
When you understand the above, it is easy to understand how we are constantly being bombarded with energies. Energy by itself is neither good or bad, it is the intent behind the energy that determines whether it is considered positive or negative energy.
So what does all of this have to do with psi balls and energy shields? The energies that are surrounding us come from many sources. Some are part of the life energy every living thing on earth gives off, some come from the sun, the stars, the planets and the universe itself, and a large number of these energies come from the people around us and all through out the world.
While I and most everyone else would like to think that the vast majority of people in the world are constantly thinking nice, pleasant thoughts, in reality there is a lot of negative thinking going on inside the minds of a huge percentage of the population at any one time. This creates an environment where the energies that are swimming around us are a mixture of both positive and negative.
Think about how many people don't like the way you drive. Ever had someone speed past you car while showing you their middle finger? The thought they are sending along with that finger are pure negative energies. If your job requires you deal with customers, you get an even bigger dose of the negative energies coming from the people that don't think you took care of them quickly enough and if you happen to be someone that is a little obnoxious, you get an even dose of it.
Of course, all of the energies out there are not directly aimed at you, but they can build up in your environment and have an affect on you. This can range from giving you a strange feeling, to making you antsy, all the way to actually making you ill and/or attracting negative events into your life.
An energy shield made from a psi ball can be used to protect you from the negative energies that surround us on a regular basis.
First a little knowledge. Building a psi ball is simply a matter of pulling energy and compressing it into a ball shape. Actually, a psi ball does not have to be in the shape of a ball. It can be oval, square, a pyramid or any other shape your mind can hold an image of.
The energy you compress into your psi ball SHOULD NOT COME FROM YOU. You should always pull energy from the universal supply, not from yourself. If you start feeling drained, then you are pulling energy from yourself.
1) Visualize a stream of pure white light coming from the universe and entering into the top of your head. Allow the light to completely fill your body and then see it move down your arms and through your hands, into the psi ball you are compressing within your hands.
2) Visualize roots growing from the base of your spine and going deep within the earth. Allow the earth's energy to move up with roots and into your body, filling every inch of your body. Once your body is full, see the energy move down your arms, through your hands and into the psi ball you are compressing within your hand.
Using the energy source of your choice, compress the energy between your hands much like making a meat ball. Simply compress the energy just like you would compress the meat. All of this is talking place within your minds eye and between your hands.
Keep building the psi ball by compressing more and more energy into it until your can actually feel the energy. It may feel like a warmth, tingling, or even a coldness.
After you feel the energy of your psi ball, don't stop there. Just keep building it by compressing more and more energy into it. You can simply move your hands further and further apart to allow additional room for the psi ball to grow.
Once your psi ball is a good size, at least a basketball size or larger and you feel like it is sufficiently strong enough, you can stop building it and literally stretch it out to make it large enough for you to step into it, allowing it to cover your entire body.
This is your energy shield or psi shield as some will call it. While within this shield, all the negative energies of the world will bounce off of you instead of being absorbed and processed by your body.
You can keep your energy shield charged through out the day by simple remembering to send a little extra energy into it a few times. For most people however, the psi shield will fade over night with they sleep and need to be rebuilt the next day.a href="#top">Return to Top
The title of this article is slightly misleading. The purpose of this article is to teach you a game that allows you to practice the ability to create and form psi balls of a specific shape. You can make regular psi balls, psi cones, psi squares or psi whatever shape you want it to be. Obviously that would have made for an exceptionally long title.
This psi game, is great for playing in chat rooms and can be played by 2 players from anywhere in the world. The only requirement being they must be in the chat room at the same time as the other player playing pass the psi ball.
One person will be "it" and build a psi ball in the normal way. But then change it from a ball shape to either a square, oval, pyramid or diamond. These basic psi ball shapes have proven to be different enough to make it easy for the receiver to know which shape they are receiving.
To change the shape, simply see within your minds eye, the ball starts to transform into your chosen shape and at the same time, mold the psi ball with your hands into the shape, sort of like you are molding clay from a ball into a square (or any other shape).
When "it" has their psi ball the way they want it, send (via visualization) to the other person they are working with.
The receiver will then post to the chat room what the shape they received was and the sender (it) can verify they are correct or not.
It is possible, to play pass the psi ball with more than two people. All that is required is for the sender (it) to send the specially shaped psi balls to multiple people, rather than just one person.Return to Top